Establishing Flow Rates with Pitot Tubes, Playpipes and Other Listed Equipment

This webinar will discuss the different tools available to determine flows in a system, the proper methods of using each tool, and a procedure for conducting a proper water flow test.

Learning Objectives:

Upon completion of this webinar attendees will be able to:

1. Identify the appropriate tool to measure water flow rates
2. Determine the water flow rate from a pressure (pitot) reading
3. Understand the proper method for conducting a flow test

Kevin Hall, M.Eng., P.E., ET, CWBSP, PMSFPE

Kevin Hall, M.Eng., P.E., ET, CWBSP, PMSFPE, is the coordinator of engineering and technical services for the American Fire Sprinkler Association (AFSA). He is a member of, and involved in, several National Fire Protection Association (NFPA) technical committees responsible for developing the model codes and standards including, NFPA 1 Fire Code, NFPA 13/13R/13D Installation of Sprinkler Systems, NFPA 20 Installation of Stationary Fire Pumps for Fire Protection, NFPA 30 Flammable and Combustible Liquids Code, and NFPA 915 Remote Inspections. He also represents AFSA on numerous UL standard technical panels responsible for revising and maintaining the product standards used in the sprinkler industry. He is a registered professional engineer in Delaware and Maryland, NICET III certified in water-based system layout, a Certified Water-Based System Professional (NFPA), and a professional member of the Society of Fire Protection Engineers. He earned his Bachelor of Science and Master of Engineering degrees from the University of Maryland, College Park in fire protection engineering. Prior to his association and committee work, he worked for Reliance Fire Protection in Baltimore, Maryland as a project manager overseeing projects of various sizes and complexity for the Contracts Division.

VERMONT

Vermont-Approved:  TQP-T3